# xrxs

`xrxs` is an experimental game server using the Plan 9 protocol `9p`.

The client is a specialized [uxn](https://wiki.xxiivv.com/site/uxn.html) ROM that can load other ROMs over the network via the `9p` service.

## design

This is the working structure of the 9p filesystem:

* `/ctl`: Read/write control file for inputing system commands. Reading the file shows the status of the last input command: 1 for success, 0 for failure; `logout` is a special case, and the status code will be -1 if it was succesful. the following are valid command syntax:
  * `login PW`: Authenticate with `xrxs` -- password is hashed against realm password hash.
  * `logout`: Gracefully remove yourself from the users table.
  * `load CART`: Load a cartridge.
  * `chunk TYPE N`: Load data of type TYPE and chunk number N.
  * `create REALM`: Create a new realm (start a new game) -- must have a cartridge loaded
  * `protect PW`: Protect the curent realm with a password if you are the master.
  * `transfer USER`: Transfer ownership of the realm to another user.
  * `delete REALM`: Delete the realm off the server if you are the master and it is empty.
  * `enter REALM`: Join an existing realm.
  * `leave`: Leave the current realm.
  * `unload`: Unload the cartridge.
  
* `/users`: Read-only; Self and others in the realm are readable from here, one per line. It contains only yourself before joining a realm. Your username on your machine is used as your username in `xrxs` -- if your name is taken, you will get an error on attaching.

* `/carts`: Available game/app cartridges for this server, read only; Carts are listed per line upon reading the file. It is backed by files on the server in a directory structure like `carts/CART_NAME/{CART_NAME.rom, data/, realms/}`.
  
* `/slot`: After loading the cartridge, its ROM is read from here; Read-only.

* `/data/`: Any supporting data that comes with the cartridge will be found here; They are in three parts: `sprite`, `audio`, and `text`. Because `uxn` is limited to 64-128kb input files, the filesizes of these data blobs should be 64kb max, and the `chunk` command should be used to page different files into the service when needed. The files on the server should be like `TYPEN` where `TYPE` is one of `sprite`, `audio`, and `text`, and `N` is any sequence of characters (canonically a nonnegative integer). When first loading the cartridge, `N == 0`. Issuing the command `chunk TYPE XXX` will attempt to load data from file `carts/CART_NAME/data/TYPEXXX` into the correct data file. If `TYPE` is not one of `sprite`, `audio`, or `text`, or the ifle `TYPEXXX` doesn't exist in the data directory, the `chunk` command does nothing.

* `/realms`: Open/saved realms, read-only. Realms and their associated universe are backed by real files on the server so that they can be preserved across service instantiations, in a directory structure like: `carts/CART_NAME/realms/REALM_NAME/{realm, universe}`. Realms can either be solo, open, or protected; Open or protected realms can have limited member numbers. Depending on the cartridge, these settings can be user-managed or managed by the cartridge itself. Realms are listed per line upon reading the file like: `REALM_NAME 1 4 1`. First would obviously be the name of the realm. The first number is number of members, second is member limit, third is 1 if protected, 0 if not. `0 1 1` represents a protected solo realm that is empty (saved game with password). `0 1 0` represents an unprotected solo realm that is empty (saved game with no password).

* `/universe`: Write here to update serverside state for this cart/realm; Read from here to get the complete current state. This is backed by a key-value-pair list on the server.

* `/scope`: Write here to tell the server the names of the `Atom`s (key/value pair of a `Universe`) you're interested in (one per line), and read from here to retrieve their values (one per line). In many cases this will be preferrable to fetching the entire `Universe`.
  
* `/random`: Read-only, get a random number from 0 to 99.

* `/grandom`: Read-only, get a random number from 0 to 99 -- These are doled out on a per-realm basis, and the number stays the same until everyone in the realm has had a chance to read it. If you've already read it this round or aren't in a realm, it will be empty.

* `/version`: Read-only, outputs the version of the `xrxs` server.

### realm format

Each realm directory on the server should have the following files:

  * `realm`: Basic data for the realm, file should contain only the maximum number of members, the master's name, and the password hash, if any (otherwise 0), separated by spaces.
  * `universe`: The actual game state for the realm as key value pairs, one per line, like `KEY = VALUE`; limit 15 characters for keys, 63 for values.
  
The realm should be synchronized to disc when realm membership, limit, or password change. Fenagling some periodic autosave should be possible...

## configuration

`config.h` in the source contains the following configuration macros:

  * `MAX_USERS`: the maximum number of simultaneous users able to attach to the `xrxs` service
  * `DATA_DIR`: the path to the root of the cartridge and realm storage; can be absolute or relative to the `xrxs` executable, but must have the trailing `/`

## build/run


### server

The `xrxs` server is built/tested in a Linux environment with `plan9port` and the C standard library as the only dependencies. With minimal modifications it will probably run just as well on Plan9, *BSD, WSL, and MacOS.

Running `./build.sh` from the `server` directory should build the `xrxs` executable.

You can run a local server (for testing, split-screen games, or single-player games) with:

```
./xrxs -m /path/to/mountpoint
```

or expose a service on the network (uses `9pserve` to support multiple users and gracefully handle disconnects) with:

```
./xrxs-srv.sh start
```

Similarly, you can stop the service with:

```
./xrxs-srv.sh stop
```

You can add `-d` to either the `xrxs` command line or the `xrxs-srv.sh` command line to enable chatty `9p` debug output.

### client

There are two versions of the client ROM. One is the normal `xrxs` client, and one is a standalone client for use as a generic `uxn` bootloader. The latter reads a ROM list out of a file called `index`, and appends the `.rom` extension to your selection and loads a file so named. Note that while the `9p` filesystem will be located under the parent directory of `./n`, the standalone bootloader assumes a flat filesystem.

You can run `./build.sh` with no options to build the normal `xrxs` client, or with any of the following options:

  * `-r`: build the normal client and run it for local testing (don't mount the remote `9p` filesystem)
  * `-l`: build the standalone bootloader
  * `-lr`: build the standalone bootloader and run it

When the client ROM has been built, run `./uxn-xrxs.sh` to mount the `9p` service and run the client.

The scripts assume you have `uxnasm` and `uxnemu` in your `PATH`. `9pfuse` is used to mount the service, but other implementations could possibly be used.