M ChangeLog → ChangeLog

@@ -1,6 +1,9 @@ 
 2018-01-15 master
 - Fixes:
   - Proper fix for issue #688
+  - Fix bad word wrapping (issue #693)
+- Enhancements:
+  - Preliminary high DPI support
 
 2017-12-30 16.1
 - Fixes:

M doc/manual.html → doc/manual.html

@@ -387,6 +387,7 @@ <li><code>width</code> and <code>height</code> can be specified without units (e.g. <code>123</code>) as pixels, or followed by <code>%</code> as percentages of the monitor size (e.g. <code>50%</code>). Use <code>100%</code> for full monitor width/height.
 Example:</li>
 </ul></li>
 <li><p><code>scale_relative_to_dpi = integer</code> : If set to a non-zero value, HiDPI scaling is enabled. Each panel is visible on a different monitor. Thus each panel has a specific scaling factor. The scaling factor is computed as the ratio between the monitor DPI (obtained from the dimensions in pixels and millimeters from RandR) and a configured reference DPI - this is the DPI for which exising user configs looked normal, for backward compatibility.</p></li>
+<li><p><code>scale_relative_to_screen_height = integer</code> : Similar to <code>scale_relative_to_dpi</code>, except the scaling factor is computed as the ratio between the monitor height and <code>scale_relative_to_screen_height</code>. The effect is cumulative with <code>scale_relative_to_dpi</code>, i.e. if both options are present, the factors are multiplied.</p></li>
 </ul>
 <pre class="highlight plaintext"><code># The panel's width is 94% the size of the monitor, the height is 30 pixels:
 panel_size = 94% 30

M doc/tint2.1 → doc/tint2.1

@@ -345,6 +345,8 @@ Example:
 .RE
 .IP \(bu 2
 \fB\fCscale_relative_to_dpi = integer\fR : If set to a non\-zero value, HiDPI scaling is enabled. Each panel is visible on a different monitor. Thus each panel has a specific scaling factor. The scaling factor is computed as the ratio between the monitor DPI (obtained from the dimensions in pixels and millimeters from RandR) and a configured reference DPI \- this is the DPI for which exising user configs looked normal, for backward compatibility.
+.IP \(bu 2
+\fB\fCscale_relative_to_screen_height = integer\fR : Similar to \fB\fCscale_relative_to_dpi\fR, except the scaling factor is computed as the ratio between the monitor height and \fB\fCscale_relative_to_screen_height\fR\&. The effect is cumulative with \fB\fCscale_relative_to_dpi\fR, i.e. if both options are present, the factors are multiplied.
 .RE
 .PP
 .RS

M doc/tint2.md → doc/tint2.md

@@ -281,6 +281,8 @@ Example:
 
   * `scale_relative_to_dpi = integer` : If set to a non-zero value, HiDPI scaling is enabled. Each panel is visible on a different monitor. Thus each panel has a specific scaling factor. The scaling factor is computed as the ratio between the monitor DPI (obtained from the dimensions in pixels and millimeters from RandR) and a configured reference DPI - this is the DPI for which exising user configs looked normal, for backward compatibility.
 
+  * `scale_relative_to_screen_height = integer` : Similar to `scale_relative_to_dpi`, except the scaling factor is computed as the ratio between the monitor height and `scale_relative_to_screen_height`. The effect is cumulative with `scale_relative_to_dpi`, i.e. if both options are present, the factors are multiplied.
+
 ```
 # The panel's width is 94% the size of the monitor, the height is 30 pixels:
 panel_size = 94% 30